The destination port name in the PRICOM-Print
CX Set-up should be set as "LPT0"-"LPT9".
If any other port name is assigned, the printer status monitor
may not function properly.
o
o
o
-
-
2
When a previously assigned port name has been
deleted, the computer should be restarted before assigning
a new printer port name.
o
o
o
o
o
3
It may not be possible to activate the printer
status monitor by going to [Start]-[Program]-[BJ Printer]-[BJ
Printer Monitor].*
o
o
o
o
o
4
It may not be possible to activate the printer
status monitor by right clicking on the installed printer
and going to [Properties]-[Maintenance]-[Start Status Monitor].
o
o
o
o
o
5
When the print job is executed from multiple client
PCs to the printer model with only a USB interface, there
will be the same status information of the first job in process
shown at all the client PCs. (There will be no message shown
as to mean "Other interface in use".)
-
-
-
-
o
Applicable Printer Model: S500, S600, S630, S6300
Restrictions
Printer
Driver Version
7.00
7.10
7.11
7.20
1
The destination port name in the PRICOM-Print
CX Set-up should be set as "LPT0"-"LPT9".
If any other port name is assigned, the printer status monitor
may not function properly.
o
o
o
-
2
When a previously assigned port name has been
deleted, the computer should be restarted before assigning
a new printer port name.
o
o
o
o
3
It may not be possible to activate the printer
status monitor by going to [Start]-[Program]-[BJ Printer]-[BJ
Printer Monitor].*
o
o
o
o
4
It may not be possible to activate the printer
status monitor by right clicking on the installed printer
and going to [Properties]-[Maintenance]-[Start Status Monitor].
o
o
o
o
5
When the print job is executed from multiple client
PCs to the printer model with only a USB interface, there
will be the same status information of the first job in process
shown at all the client PCs. (There will be no message shown
as to mean "Other interface in use".)
-
-
-
o
o : Restriction applies
*It is not possible to display the status information
of printer in idle mode even when the BJ status monitor is activated.
Windows NT4.0 Driver
Please note the following restrictions.
Restrictions
Printer
Driver Version
2.5x
4.1x
4.2x
4.3x
4.4x
4.5x
1
It may not be possible to monitor the printer
status via the BJ Printer Monitor.
o
o
o
o
-
-
2
The destination printer port name in the PRICOM-Print
CX Set-up should be left as default. If any other port name
is used, the printer may not function properly.
-
-
-
o
-
-
3
The destination printer port name in the PRICOM-Print
CX Set-up should be xxx0: to xxx3 (xxx shall be any 3 characters
of your choice. (e.g.:"ABC0:")
o
o
o
-
-
-
4
It may not be possible to activate the printer
status monitor by right clicking on the installed printer
and going to [Properties]-[Maintenance]-[Start Status Monitor].
-
-
-
-
o
o
o : Restriction applies
Windows 2000/XP Driver
Please note the following restrictions.
Restrictions
Printer
Driver Version
1.1x
1.2x
1.3x
1.4x
1.5x
1
It may not be possible to activate
the printer status monitor by right clicking on the installed
printer and going to [Properties]-[Maintenance]-[Start Status
Monitor].
o
o
o
o
o
2
When the print job is executed from
multiple client PCs to the printer with PD series printers,
there will be the same status information of the first job
in process shown at all the client PCs. (There will be no
message shown as to mean "Other interface in use".)